MK1 02A 02J TRANSMISSION MOUNT KIT

$229.00

Ready to install that 02a or 02j into your mk1, here is where you start, our laser cut, tig welded, and powdercoated brackets have been making this swap simple for years.. includes front and rear mount plates (uses stock style mk1 rubber mounts ; not included but can be purchased here )

02j will REQUIRE the reverse switch to be removed if you are using the cable clutch conversion kit, a plug will be provided for you.  However if you are using the Hydro MK1 Kit  you can keep the reverse switch, cable clutch users will get a bracket that bolts on to hold the cable at the trans with the purchase of their 02j Cable Clutch kit .

02a kits will come with a shim as the mounting face is smaller, please put a note in your order if you are using an 02a trans.

Install Notes:

  • 02js will require the upper mount bracket holes be DRILLED out as they are threaded, use a 13/32 bit, this will create the same size hole as the 02A cases and work with the provided hardware

Available on backorder

64mm Mk1 Poly Transmission Mount Bushing

64mm mount bushings were using on the upper trans mount starting in 74 through 93, they also used the 64mm bushing on some of the motor mounts but that was early cars only.

These bushings are 65a hardness which is just tougher than the OEM HD mount bushings. It is considerably softer than the 85a poly bushings (red – energy) that will rattle your teeth out of your head.

Sold individually, mount brackets are sold separately.

Mk1 Transmission Square Mount - 175399151B

Shipped to us from Germany these OE mounts will hold up to your new engines power without making your teeth rattle off the dashboard. - 175399151B

Mk1 Mk2 02A 02J Cable Clutch Conversion Kit


 

This kit uses an OE style Eurovan cable clutch actuator, the cable is designed specific for our needs, using an OEM mk1/2 clutch cable connection, metal adjuster sleeve and adjustment nut,  its longer length allows you to tuck the cable under the transmission and swing around the starter.

* You need to make sure your pedal cluster is in good shape, this cable system is going to pull harder than your old 020 cable did. Proper lubrication of the cable prior to install is KEY!!

Kit includes the needed tab for mk1 and mk2  installation, it simply bolts onto your transmission.

 

Description

Ready to install that 02a or 02j into your mk1, here is where you start, our laser cut, tig welded, and powdercoated brackets have been making this swap simple for years.. includes front and rear mount plates (uses stock style mk1 rubber mounts ; not included but can be purchased here )

02j will REQUIRE the reverse switch to be removed if you are using the cable clutch conversion kit, a plug will be provided for you.  However if you are using the Hydro MK1 Kit  you can keep the reverse switch, cable clutch users will get a bracket that bolts on to hold the cable at the trans with the purchase of their 02j Cable Clutch kit .

02a kits will come with a shim as the mounting face is smaller, please put a note in your order if you are using an 02a trans.

Install Notes: