Mk1 Engine and Transmission Mounts

From: $0.00

Mk1 Engine and Transmission Mounts

From: $0.00

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard. If you have purchased a bracket that takes a bushing, buy the bushing you need and select the PRESS option and we will send it pressed into your new bracket.

74mm mount for the passenger side motor mount,

64mm bushing for the upper transmission mount, (if you have an early car, it will use the 64 for the motor as well, our VR6 swap kits use the 64mm on both engine and trans mounts)

We have added a Urethane Filled mount  option as well,  Roughly a shore rating of 65, they come in the 74 and 64mm versions only.

square lower transmission mount HD Rubber only

starter bracket bumper Rubber or Poly

Mk1 Engine Mount (74mm)

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard. 1- 74mm passenger side motor mount bushing

 

We offer a complete set of mounts if you need to replace them all.

In stock

Mk1 Transmission/Starter Mount (bumper)

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard.

In stock

Mk1 Transmission Square Mount

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard.

In stock

Mk1 Transmission Mount (64mm)

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard.

In stock

Press bushings into brackets

We will press your purchased mount bushings into your mount brackets for you if you need us to, this way they are ready to bolt right in!

Mk1 Engine Mount Urethane Filled (74mm)

We take a heavy duty OE mount, and fill it with a urethane to give a shore hardness of about 65, softer than poly urethane but more durable than just an HD mount.

In stock

Mk1 Engine Mount Urethane Filled (64mm)

We take a heavy duty OE mount, and fill it with a urethane to give a shore hardness of about 65, softer than poly urethane but more durable than just an HD mount.

In stock

Mk1 Starter Buffer Mount, Poly Urethane

Mk1 Poly Starter Buffer Mount, heavy duty poly, much stronger than rubber.

In stock

Shipped to us from Germany these mounts will hold up to your new engines power without making your teeth rattle off the dashboard. If you have purchased a bracket that takes a bushing, buy the bushing you need and select the PRESS option and we will send it pressed into your new bracket.

74mm mount for the passenger side motor mount,

64mm bushing for the upper transmission mount, (if you have an early car, it will use the 64 for the motor as well, our VR6 swap kits use the 64mm on both engine and trans mounts)

We have added a Urethane Filled mount  option as well,  Roughly a shore rating of 65, they come in the 74 and 64mm versions only.

square lower transmission mount HD Rubber only

starter bracket bumper Rubber or Poly