mk4

Viewing posts tagged mk4

S&P Radiator and Intercooler Stack

We shortened up our dual pass radiator, and made it stockier, 2.5″ thick core, so that we could put a 21×2.5×3″ intercooler core on the top of it.  Now we can add a condenser to the front if we need to, or tuck it all the way under the core support and make some room for that 1.8t log manifold.

We should have this ready for shipment by mid to late February, we are sorting out the last bits of attachment points, testing outlet sizes and making piping kits for 1.8t and TDIs

 

IMG_4771 IMG_4770 IMG_4767

 

Keep your eye out for a purchase date!

EuroTripper 5 Come See Us In Sunny Florida!!

When Eurotripper comes around in the calendar I am ready to find some warmer weather, tired of the wet and cold, GIVE ME SUN and 70 degrees already!!

So come see us at ET5, we will have stuff to fill your grab bag, parts for your project, and an empty chair if you just want to shoot the breeze.

 

et5

 

Get your event details here ET5Show

PowerFlex Poly Is Here!

Thats right, ditch the factory rubber for high density poly..

 

We have common kits bundled together, but all of the items are available individually, Control Arms, Steering Racks, Rear Beams, Strut Mounts, Sway Bars Ect…

 

For a limited time get FREE SHIPPING on all of our PowerFlex Parts!!

 

Mk1                                Mk2                                          Mk3                                      Mk4

mk1kit mk2kit

 

mk4frontstrutlowering

Unleash the Beast! UnitedMotorsports is Here!

That’s right, S&P is now a United Motorsports Tuner, send us your timid, stock ecu and have it returned a beast in a box!  Pricing will be the same as if you went to UM directly, (no labor up charges or fees).

 

SPsolid unitedmotors

Billet Coolant Sensor Adapters

These adapters are great if you are a mk1 owner with a mk3/4/5 swapped chassis and are needing to keep that mk1 cluster working perfectly.. Simply install this in one of the spare locations found in the coolant system, attach the included ground wire, thread your sensor into the adapter, attach your original signal wire and boom, a working mk1 cluster again!

They also work for aftermarket gauge installations for the mk3/4/5 owners, install the sensor into the adapter, ground the adapter with the provided ground wire, install into the coolant flange, enjoy an aftermarket gauge in your cockpit!

*sensor thread size is m10x1*

 

$24.00 shipped in the USA Check them out HERE

12v Vr6 Coilpack Relocation Kit

Tired of looking at those spark plug wires on your 12v VR? Running a SRI or an intake without the wire retainers?  Install our coil pack relocation kit and  using your stock wires, the coil will now mount where the SAI pump was.  Included with out mounting bracket is an SAI delete plug for either AFP or AAA (choose which one you have when adding it to your cart.

 

Get them HERE !!!

5243034 (2)image

S&P Digital to Analog Tach Converter/Adapter with Cylinder Correction

Here is our “magic” box !! Its a dual purpose unit and has 2 modules in it, digital>analog + cylinder conversion. It’s used for many applications, putting a VR6/1.8t/TDI/2.0 into a mk1/2 and retaining your factory cluster.  (However if you wanted to drop an ls1 into your mk1 and drive the stock tach, this will do it for you)


This module will allow your factory cluster to read the correct rpm of the engine. It will save time on not having to do a dash swap or retrofitting the 6 cylinder cluster and allow you to maintain that stock sleeper look inside your mk1 or mk2.

In stock and ready to ship HERE

 

We are going to test soon on vanagon, beetle ect for those running subaru or late model swaps in their aircooled beasts..