tdi

Viewing posts tagged tdi

S&P Radiator and Intercooler Stack

We shortened up our dual pass radiator, and made it stockier, 2.5″ thick core, so that we could put a 21×2.5×3″ intercooler core on the top of it.  Now we can add a condenser to the front if we need to, or tuck it all the way under the core support and make some room for that 1.8t log manifold.

We should have this ready for shipment by mid to late February, we are sorting out the last bits of attachment points, testing outlet sizes and making piping kits for 1.8t and TDIs

 

IMG_4771 IMG_4770 IMG_4767

 

Keep your eye out for a purchase date!

PowerFlexUSA Bushings Are Here!

S&P is now a PowerFlexUSA distributor, we will be offering free shipping in the USA for ANY make or model they offer, and will be integrating their bushings into our swap kits.
EMAIL us for price requests, it will take some time to get their catalog onto our page.

WHY POLYURETHANE SUSPENSION BUSHINGS?

  • Increased Tire Life
  • Decreased Deflection
  • Increased Responsiveness
  • Reduced Braking Distances
  • Improved Performance
  • Increased Safety


powerflexlogo
mk1pf

Billet Coolant Sensor Adapters

These adapters are great if you are a mk1 owner with a mk3/4/5 swapped chassis and are needing to keep that mk1 cluster working perfectly.. Simply install this in one of the spare locations found in the coolant system, attach the included ground wire, thread your sensor into the adapter, attach your original signal wire and boom, a working mk1 cluster again!

They also work for aftermarket gauge installations for the mk3/4/5 owners, install the sensor into the adapter, ground the adapter with the provided ground wire, install into the coolant flange, enjoy an aftermarket gauge in your cockpit!

*sensor thread size is m10x1*

 

$24.00 shipped in the USA Check them out HERE

Bolt in Mk1 Hydraulic Clutch Kit

With the help of our Canadian friends we have put together a nice bolt in hydro clutch kit for your mk1.  Now putting that six speed 02m into your mk1 chassis just became a little easier.

Our kit comes with the backing plate, wilwood .75 master cylinder, and optional slave cylinder if needed.  02m users will need a threaded bleeder adapter which will be offered soon, but for now can be purchased from vendors like 034 motorsport or ECS.

Base Price 375 plus shipping!

Order It Here

S&P Digital to Analog Tach Converter/Adapter with Cylinder Correction

Here is our “magic” box !! Its a dual purpose unit and has 2 modules in it, digital>analog + cylinder conversion. It’s used for many applications, putting a VR6/1.8t/TDI/2.0 into a mk1/2 and retaining your factory cluster.  (However if you wanted to drop an ls1 into your mk1 and drive the stock tach, this will do it for you)


This module will allow your factory cluster to read the correct rpm of the engine. It will save time on not having to do a dash swap or retrofitting the 6 cylinder cluster and allow you to maintain that stock sleeper look inside your mk1 or mk2.

In stock and ready to ship HERE

 

We are going to test soon on vanagon, beetle ect for those running subaru or late model swaps in their aircooled beasts..

S&P Mk1 Fan Shrouds

A custom radiator like OURS needs a custom shroud, well now we have one.  These aluminum shrouds are designed to be used with our radiators, they can also be fitted to a stock mk1 or mk2 radiator with minimal user modification.

 

We are using a high quality, well balanced 10″ 1650 CFM fan.  The fans can be purchased separately HERE.

 

image

 

Finishes for the shrouds will include, polished or raw aluminum, for an extra fee we can have them powder coated.  We will be offering an option as a complete cooling package with our radiators, already wired with a relay and temp sensor all you will need to do is hook up a labeled power and ground, plumb the coolant lines and you’re running cooler than before!  Check out the shrouds in our store NOW!

Summer Software Sale

It’s time for a summer sale, if you are thinking about a mk4 motor swap for your mk1, we are offering 20 percent off your wiring harness work or ecu tuning when you purchase an integration kit from us. This offer is good until around mid August. Purchase of the integration kit must be between July 10 and August 15, your harness can be scheduled up to a month after that. image image

 

How To Install Our Parts by VWDIESELNET

Ryan over at VWDIESEL.NET wanted to build a tdi swapped caddy using our parts.  He went way beyond the call of duty and made a set of videos documenting the various parts used, and how he installed them.  Check out the website for more awesome videos on keeping your VW on the road.  http://www.vwdiesel.net

 

Part 1 : Parts Overview

 

Part 2: Mounts and Engine Prep

 

Part 3: Shift Rods, Cable Clutch Kit, Exhaust

Grumman

 

 

It is for no better explanation, a sales pitch.  Grumman Olsen was trying to get the USPS bid for manufacturing the postal carrier vehicle..   between 1983-1985 they produced 500 kubvans in 2 different models (70 and 100) with a couple different options.  High or low Floor (cargo area) dual or single rear doors, automatic or manual shift and right or left drive.

Most were automatics, almost all were diesel, I have heard that a few may have been ordered with the CIS gas engine.

Mine is a 100, with a manual trans (1/23 supposedly) single rear door, high floor.  I looked for almost 4 years for one, and in January of 14 I found one in Ohio.  After alittle time talking with the owner we struck a deal and it was on its way to me.

kubvan 002kubvan 001

I drove it around the neighborhood for a while trying to find out what worked and what didnt .. all the while thinking of paint schemes and engine options.

With a local show coming up in April I wanted to have it there and the simplest way with our work load and project list piling up was to work on the exterior first and then pull the original drive train out after the local show.

kubvan 003 A little bit of OD Green and Raptor tintable bedliner produced the finish I was looking for, and I can scrub it with a brush if it gets dirty and not worry about scratching the paint.

 

kubvan 004

 

 

 

We added a bullbar for safety… you know how rough the city streets of Chattanooga can be..

 

 

Final touches were a set of wheels that I use on every car, but never sell with a car. My Ronal Turbos. They were not what I had in mind but with the fenders and the offsets I was going to have to work with, these fit the bill.  We also added a roof rack and a functioning ladder to access the rack.

kubvan 011

It made it to the local show and we had a great time.

 

 

 

kubvan 012

 

 

From the local show to SOWO14 was only 30 days, so we were still under a bit of a time crunch to get the new driveline inplace to make it to Helen GA.

kubvan 008

The rebuilt ALH motor from an 03 Beetle TDI was painted CAT yellow before installing the accessories or transmission parts.

 

kubvan 009

 

 

 

With all the accessories on we were ready to try out the new MK1 02A mounts and mk1 02J shift linkages we had made.  Of course they fit like a glove and work even better.  The Eurovan Cable Clutch conversion kit was also used on this chassis to simplify the mk1 02a/j conversion.  Scirocco 16v axles were used with the standard mk1 hubs.

 

IMG_4328

IMG_4327

 

 

 

 

 

 

 

With those installed we were onto wiring, inter-cooler plumbing,and maintenance parts on the spindles and hubs.

kubvan 020After a snafu with the VNT 17 turbo we put on it having locked up vanes, we got a new one in a hurry and installed it, made about 20 miles of test drives and set off for SOWO14.  We received our new decals as we were pulling out of the shop

kubvan 015

 

We made the trip with out any issues,  had a great time cruising around town seeing old friends.  They had a mobile dyno setup so we crawled on top of it to see how we did. kubvan 017kubvan 016kubvan 023 The video is not that great as we were having issues finding a tach signal to work off of.  After that was sorted we got 3 good pulls and managed 325ft/lbs of torque and 146hp.

 

Overall I am very happy with the performance and drive-ability of this vehicle,  I have put a total of 1000 miles on the swap as of 6/4/14 and will continue to update as we add new parts.

kubvan 022kubvan 014