Description
Mk1 Vr6? MK1 07k? 16v Carbs need fresh air? What Radiator? Here is your solution, a 1.75″ core, dual pass, 11″ tall, 24″ long radiator, it has mounting plates for you to bolt it down to the core support. This is the radiator I use for my vr6 swaps, 07k swaps, carbed motors, anything that needs the radiator to fit under the core support for the most room possible in the bay itself..
In the interest of providing quality cooling systems for customers without them needing to come back and buy a shroud and fan control after the rad has left my shop, I am providing these as a cooling package. This includes
- 50mm core radiator – (we also offer a 32mm core if you need an extra 3/4″ of room – request them in the notes)
- Coolant ports 1.25″ on the Drivers side (USA)
- VW thermoswitch in the base of the radiator
- Fan Relay mounted and wired to fans – just connect fused power and ground
- 2 cooling fans mounted on an aluminum shroud, bolted to the radiator, allows for disassembly for tight installs or paint/service.
- Powdercoating is still an option, just purchase the LARGE size for the entire assembly,