Mk1 ALH BEW Turbo Intake Pipe Kit

From: $165.00

ALH Turbo inlet pipe kit, designed for swaps, it holds tight to the back of the intake manifold and close to the vacuum pump,  this is not for mk4s or stock installs.

Kit includes,

Mandrel bend aluminum pipe 2.5″,  K&N Dry air filter, silicone adapters

We offer it without a MAF housing bung installed, ( there is an add on option to include welding on a maf sensor) you can also add a CCV port.  It comes in Raw finish unless you add the powder coating option. Standard coating is Wrinkle unless you provide a note otherwise. Please allow extra time for welded and coated options.

Custom Powder Coating Option

Purchase this option if you want something we offer coated other than the standard offering,

Example : The mk1 06a motor mount is standard gloss black, you want it Fire Red, you would use the small option, a set of motor, and trans brackets would use the medium, as would just having a shroud done, the last option is for a radiator and shroud, or a large group of small pieces.

Clear

Weld on options

These are options to have welded onto your intake pipes, intercoolers, and other pipe kits..

 

This must be purchased with the item you want it welded to, the cost does include the port, or flange required.. you dont need to purchase one separately.. if you are ordering for an intercooler or have specific instructions for a location they need to be included in your order notes.

  • Mk4 Maf - All mk4 based maf
  • MK4 Map - 1.8t and TDI MAP
  • Mk3 Maf - ABA - VR6 Maf
  • Mk3 IAT/MAP - G60 Co-pot, MK3 TDI IAT
  • CCV - Any CCV tube, 5/8" OD or 16mm is standard, you can request any size up to 1"
    • you can also use this for a boost port, or any port you need that is under 1" and tube based
  • 02 Sensor - add an extra 02 port to your downpipe or test pipe
Clear

Weld on options

These are options to have welded onto your intake pipes, intercoolers, and other pipe kits..

 

This must be purchased with the item you want it welded to, the cost does include the port, or flange required.. you dont need to purchase one separately.. if you are ordering for an intercooler or have specific instructions for a location they need to be included in your order notes.

  • Mk4 Maf - All mk4 based maf
  • MK4 Map - 1.8t and TDI MAP
  • Mk3 Maf - ABA - VR6 Maf
  • Mk3 IAT/MAP - G60 Co-pot, MK3 TDI IAT
  • CCV - Any CCV tube, 5/8" OD or 16mm is standard, you can request any size up to 1"
    • you can also use this for a boost port, or any port you need that is under 1" and tube based
  • 02 Sensor - add an extra 02 port to your downpipe or test pipe
Clear

Description

ALH Turbo inlet pipe kit, designed for swaps, it holds tight to the back of the intake manifold and close to the vacuum pump,  this is not for mk4s or stock installs.

Kit includes,

Mandrel bend aluminum pipe 2.5″,  K&N Dry air filter, silicone adapters

We offer it without a MAF housing bung installed, ( there is an add on option to include welding on a maf sensor) you can also add a CCV port.  It comes in Raw finish unless you add the powder coating option. Standard coating is Wrinkle unless you provide a note otherwise. Please allow extra time for welded and coated options.

Additional information

Weight 4 lbs
Dimensions 28 × 6 × 14 in

Custom Powder Coating Option

Weld on options

Weld on options