We shortened up our dual pass radiator, and made it stockier, 2.5″ thick core, so that we could put a 21×2.5×3″ intercooler core on the top of it. Now we can add a condenser to the front if we need to, or tuck it all the way under the core support and make some room for that 1.8t log manifold.
We should have this ready for shipment by mid to late February, we are sorting out the last bits of attachment points, testing outlet sizes and making piping kits for 1.8t and TDIs
Look at that, a radiator that fits UNDER your core support, now you can tuck it out of your way. Great for CARBS, ITBS, or even the big VR6 swaps.. We have a special shroud for these radiators, and as with our other radiators, they use the stock fan switch, and factory size coolant inlet and outlets.
These adapters are great if you are a mk1 owner with a mk3/4/5 swapped chassis and are needing to keep that mk1 cluster working perfectly.. Simply install this in one of the spare locations found in the coolant system, attach the included ground wire, thread your sensor into the adapter, attach your original signal wire and boom, a working mk1 cluster again!
They also work for aftermarket gauge installations for the mk3/4/5 owners, install the sensor into the adapter, ground the adapter with the provided ground wire, install into the coolant flange, enjoy an aftermarket gauge in your cockpit!
Tired of looking at those spark plug wires on your 12v VR? Running a SRI or an intake without the wire retainers? Install our coil pack relocation kit and using your stock wires, the coil will now mount where the SAI pump was. Included with out mounting bracket is an SAI delete plug for either AFP or AAA (choose which one you have when adding it to your cart.
Here is our “magic” box !! Its a dual purpose unit and has 2 modules in it, digital>analog + cylinder conversion. It’s used for many applications, putting a VR6/1.8t/TDI/2.0 into a mk1/2 and retaining your factory cluster. (However if you wanted to drop an ls1 into your mk1 and drive the stock tach, this will do it for you)
This module will allow your factory cluster to read the correct rpm of the engine. It will save time on not having to do a dash swap or retrofitting the 6 cylinder cluster and allow you to maintain that stock sleeper look inside your mk1 or mk2.
A custom radiator like OURS needs a custom shroud, well now we have one. These aluminum shrouds are designed to be used with our radiators, they can also be fitted to a stock mk1 or mk2 radiator with minimal user modification.
We are using a high quality, well balanced 10″ 1650 CFM fan. The fans can be purchased separately HERE.
Finishes for the shrouds will include, polished or raw aluminum, for an extra fee we can have them powder coated. We will be offering an option as a complete cooling package with our radiators, already wired with a relay and temp sensor all you will need to do is hook up a labeled power and ground, plumb the coolant lines and you’re running cooler than before! Check out the shrouds in our store NOW!