Sitewide we are having a 10 percent off sale, when you go to checkout, use the code turkeycoma – any current sales will still be active and your discount will be off your CART total, not off one specific product or category. (shipping is obviously not part of your cart total, nor are applicable taxes for TN residents)
Solowerks is offering a MAIL IN rebate on top of our discount, starting the 21st of November through the month of December (our discount sale only goes until the 1st of DEC, if you want the discount and the rebate you need to order before our sale ends) Once you purchase and receive your coilovers, print your receipt and mail it in with a form included in your shipping box to Solowerks and they will cut you a check for 50.00 (25 on caddy kits)
Malone Tuning is offering 10 percent off all tunes during our promotion!
Tower shifters and cables are included in this sale!! Powdercoating will take a few extra days with the holidays so keep that in mind!
We shortened up our dual pass radiator, and made it stockier, 2.5″ thick core, so that we could put a 21×2.5×3″ intercooler core on the top of it. Now we can add a condenser to the front if we need to, or tuck it all the way under the core support and make some room for that 1.8t log manifold.
We should have this ready for shipment by mid to late February, we are sorting out the last bits of attachment points, testing outlet sizes and making piping kits for 1.8t and TDIs
That’s right, S&P is now a United Motorsports Tuner, send us your timid, stock ecu and have it returned a beast in a box! Pricing will be the same as if you went to UM directly, (no labor up charges or fees).
These adapters are great if you are a mk1 owner with a mk3/4/5 swapped chassis and are needing to keep that mk1 cluster working perfectly.. Simply install this in one of the spare locations found in the coolant system, attach the included ground wire, thread your sensor into the adapter, attach your original signal wire and boom, a working mk1 cluster again!
They also work for aftermarket gauge installations for the mk3/4/5 owners, install the sensor into the adapter, ground the adapter with the provided ground wire, install into the coolant flange, enjoy an aftermarket gauge in your cockpit!
Tired of looking at those spark plug wires on your 12v VR? Running a SRI or an intake without the wire retainers? Install our coil pack relocation kit and using your stock wires, the coil will now mount where the SAI pump was. Included with out mounting bracket is an SAI delete plug for either AFP or AAA (choose which one you have when adding it to your cart.
Here is our “magic” box !! Its a dual purpose unit and has 2 modules in it, digital>analog + cylinder conversion. It’s used for many applications, putting a VR6/1.8t/TDI/2.0 into a mk1/2 and retaining your factory cluster. (However if you wanted to drop an ls1 into your mk1 and drive the stock tach, this will do it for you)
This module will allow your factory cluster to read the correct rpm of the engine. It will save time on not having to do a dash swap or retrofitting the 6 cylinder cluster and allow you to maintain that stock sleeper look inside your mk1 or mk2.