Posted on

VR-lequin

S&P’s take on a VR6 Harlequin.

Almost everyone has seen one, whether or not they knew it was a purpose built car and not an accident, who knows…

In 1996 Volkswagen built a small batch of cars for a promotional purpose. They were built on a 4 door Golf GL chassis, the only real interior difference was the seat upholstery, it was the same fabric used in the “joker” trim on European models of the same era.  The outside is where the “magic” happened, VW took panels from 4 base color cars (Red, Blue, Green and Yellow) and swapped the removable panels between the other base color cars, leaving you with a very loud exterior.

 

Fast forward to 2015, and I have an opportunity to buy a very sad, yellow base harlequin locally.  It had been resprayed at some point to be all yellow, but the colored panels were peeking through the worn paint.  The driveline was tired, the interior was beyond tired, it was time for either a restoration, or euthanasia…

I sent the car off in pieces to my local painter, he began smoothing out life’s abuses and owners neglect, fixing shopping cart dings, and poorly placed jack stands.  We needed a new hatch, or at least a tub that wouldn’t fall out every time you closed the hatch or went over a bump.

I found someone parting a 4 door golf, that had a lot of Euro market parts, hatch, bumpers, core supports, rebars, etc.  We took it all.

Next on the list was the interior, after looking and not finding anyone wanting to sell their limited edition seats, I spoke with Kip at Loves Trim Shop and worked out a plan for some new threads.  Mk2 Recaros on mk3 bases, leather wrapped, suede inlays and stitching to match the colors outside, without making the interior too loud to enjoy driving it.

That left me to get started on the driveline, the stock ABA was no different in the harlequin cars than it was in a standard Golf GL.

I had a 2.8 24v from a GTI that was wrecked, I had the machine shop go through the block, hone and a ring job, new bearings, new chains, guides, gaskets etc.

I couldn’t help myself, since I had it all in pieces I painted each section of the motor in the matching colors of the car, engine block, head, upper timing cover, lower timing cover, valve cover, intake, accessories, brackets…
I was seeing spots from all of the painting and planning.

Now that the car had been painted back to its original colors, engine painted and assembled and interior back from Love’s, it was time to make it a whole car again.
This is always the fun part, assembly is very gratifying.

Since the interior itself wasn’t very “loud”, Brandon Rosensteel at EuroGlow made an overlay for me.

Once the car was fully assembled, we could enjoy the best part of a vr6 swap – DRIVING!

During this build, a lady had contacted me about wanting to purchase the car when it was done. That is another story all together and arguably better than the one I just told you.
She and “Polly” now are in the Knoxville area, so if you see them, say hello!

Posted on

Matts 1981 VRirocco

Matt wanted to be able to jump in his Scirocco and drive it everyday, without worrying about the failing CIS system leaving him on the side of the road.   To overhaul the 1.8 and rebuild the CIS system was a realistic option, however after looking at the cost of the rebuild he realized he was well on his way to a later model motor swap.  Even better.  Better mileage from an 02 controlled fuel system, more power, easier to find parts. Win-win!

On to the evidence!!

IMG_5176 IMG_5177

Slightly better after a washing!

IMG_5178 IMG_5179

Ready to Paint!

IMG_5184 IMG_5189

Our  MK1 VR6 motor mounts ready to go!

IMG_5181 IMG_5180IMG_5182

Motor hanging!

IMG_5201IMG_5202

Integrated Cable Boss on our mk1 02a mounts, we also offer a smooth version for our mk1 hydro kit

IMG_5211

 

Its ready to go home!

Mk1 Vr6 Scirocco conversion, stainless shift rod kit, full 2.5″ stainless exhaust, silicone coolant lines, hidden 3″ maf intake pipe, 2.25″ tucked radiator with fan and shroud.  everything you need to have a fun in your mk1!

 

Interested in installing one into your own mk1? Interested in having us install one into your mk1?

Check the kit out here !!  Contact us anytime :  info@s-pautomotive.com

 

 

Posted on

1.8t Powered Go-Kart

Steve built this man sized go-kart based off an Ariel Atom, all hand built, no kits or rolling chassis.  He dropped it off for a tidy up on the wiring and to add a couple other items.

 

aa4 aa10

We took a quick note of what needed to be done:

aa2 aa8  aa9

We got to work straight away  cleaning and removing excess wiring and general mess

aa6aa5

Now to start the rebuilding:

aa3 AA1

Concealed under the dash is one of our sealed fuse-boxes we use for large load motor swaps, or in this case, a complete car system:

IMG_5036

 

We also installed a battery disconnect switch, push button start system, a working obd2 port for diagnostics and live data logging.

 

Interested in a project like this? Send us an email, we would love to talk with you about your crazy idea, and how we can help you make it happen, Steve built this car when everyone said he couldn’t, wouldn’t or shouldn’t. That sounds to me like perfect kind of motivation!