Posted on

Black Friday Sales!

BLACK FRIDAY SALES SCHEDULE

Sitewide we are having a 10 percent off sale, when  you go to checkout, use the code turkeycoma – any current sales will still be active and your discount will be off your CART total, not off one specific product or category. (shipping is obviously not part of your cart total, nor are applicable taxes for TN residents)

 

Solowerks is offering a MAIL IN rebate on top of our discount, starting the 21st of November through the month of December (our discount sale only goes until the 1st of DEC, if you want the discount and the rebate you need to order before our sale ends) Once you purchase and receive your coilovers, print your receipt and mail it in with a form included in your shipping box to Solowerks and they will cut you a check for 50.00 (25 on caddy kits)

 

 

Malone Tuning is offering 10 percent off all tunes during our promotion!

 

Tower shifters and cables are included in this sale!! Powdercoating will take a few extra days with the holidays so keep that in mind!

 

Check out the products! 

 

Posted on

VR-lequin

S&P’s take on a VR6 Harlequin.

Almost everyone has seen one, whether or not they knew it was a purpose built car and not an accident, who knows…

In 1996 Volkswagen built a small batch of cars for a promotional purpose. They were built on a 4 door Golf GL chassis, the only real interior difference was the seat upholstery, it was the same fabric used in the “joker” trim on European models of the same era.  The outside is where the “magic” happened, VW took panels from 4 base color cars (Red, Blue, Green and Yellow) and swapped the removable panels between the other base color cars, leaving you with a very loud exterior.

 

Fast forward to 2015, and I have an opportunity to buy a very sad, yellow base harlequin locally.  It had been resprayed at some point to be all yellow, but the colored panels were peeking through the worn paint.  The driveline was tired, the interior was beyond tired, it was time for either a restoration, or euthanasia…

I sent the car off in pieces to my local painter, he began smoothing out life’s abuses and owners neglect, fixing shopping cart dings, and poorly placed jack stands.  We needed a new hatch, or at least a tub that wouldn’t fall out every time you closed the hatch or went over a bump.

I found someone parting a 4 door golf, that had a lot of Euro market parts, hatch, bumpers, core supports, rebars, etc.  We took it all.

Next on the list was the interior, after looking and not finding anyone wanting to sell their limited edition seats, I spoke with Kip at Loves Trim Shop and worked out a plan for some new threads.  Mk2 Recaros on mk3 bases, leather wrapped, suede inlays and stitching to match the colors outside, without making the interior too loud to enjoy driving it.

That left me to get started on the driveline, the stock ABA was no different in the harlequin cars than it was in a standard Golf GL.

I had a 2.8 24v from a GTI that was wrecked, I had the machine shop go through the block, hone and a ring job, new bearings, new chains, guides, gaskets etc.

I couldn’t help myself, since I had it all in pieces I painted each section of the motor in the matching colors of the car, engine block, head, upper timing cover, lower timing cover, valve cover, intake, accessories, brackets…
I was seeing spots from all of the painting and planning.

Now that the car had been painted back to its original colors, engine painted and assembled and interior back from Love’s, it was time to make it a whole car again.
This is always the fun part, assembly is very gratifying.

Since the interior itself wasn’t very “loud”, Brandon Rosensteel at EuroGlow made an overlay for me.

Once the car was fully assembled, we could enjoy the best part of a vr6 swap – DRIVING!

During this build, a lady had contacted me about wanting to purchase the car when it was done. That is another story all together and arguably better than the one I just told you.
She and “Polly” now are in the Knoxville area, so if you see them, say hello!

Posted on

Matts 1981 VRirocco

Matt wanted to be able to jump in his Scirocco and drive it everyday, without worrying about the failing CIS system leaving him on the side of the road.   To overhaul the 1.8 and rebuild the CIS system was a realistic option, however after looking at the cost of the rebuild he realized he was well on his way to a later model motor swap.  Even better.  Better mileage from an 02 controlled fuel system, more power, easier to find parts. Win-win!

On to the evidence!!

IMG_5176 IMG_5177

Slightly better after a washing!

IMG_5178 IMG_5179

Ready to Paint!

IMG_5184 IMG_5189

Our  MK1 VR6 motor mounts ready to go!

IMG_5181 IMG_5180IMG_5182

Motor hanging!

IMG_5201IMG_5202

Integrated Cable Boss on our mk1 02a mounts, we also offer a smooth version for our mk1 hydro kit

IMG_5211

 

Its ready to go home!

Mk1 Vr6 Scirocco conversion, stainless shift rod kit, full 2.5″ stainless exhaust, silicone coolant lines, hidden 3″ maf intake pipe, 2.25″ tucked radiator with fan and shroud.  everything you need to have a fun in your mk1!

 

Interested in installing one into your own mk1? Interested in having us install one into your mk1?

Check the kit out here !!  Contact us anytime :  info@s-pautomotive.com

 

 

Posted on

SHAWWTYS ARE HERE!!

Look at that, a radiator that fits UNDER your core support, now you can tuck it out of your way.  Great for CARBS, ITBS, or even the big VR6 swaps..  We have a special shroud for these radiators, and as with our other radiators, they use the stock fan switch, and factory size coolant inlet and outlets.

Grab just the radiator HERE

 

Grab a shroud package HERE

img_4550 img_4549 img_4544 img_4545 img_4546 img_4547 img_4548

Posted on

S&P Mk1 Fan Shrouds

A custom radiator like OURS needs a custom shroud, well now we have one.  These aluminum shrouds are designed to be used with our radiators, they can also be fitted to a stock mk1 or mk2 radiator with minimal user modification.

 

We are using a high quality, well balanced 10″ 1650 CFM fan.  The fans can be purchased separately HERE.

 

image

 

Finishes for the shrouds will include, polished or raw aluminum, for an extra fee we can have them powder coated.  We will be offering an option as a complete cooling package with our radiators, already wired with a relay and temp sensor all you will need to do is hook up a labeled power and ground, plumb the coolant lines and you’re running cooler than before!  Check out the shrouds in our store NOW!

Posted on

Summer Software Sale

It’s time for a summer sale, if you are thinking about a mk4 motor swap for your mk1, we are offering 20 percent off your wiring harness work or ecu tuning when you purchase an integration kit from us. This offer is good until around mid August. Purchase of the integration kit must be between July 10 and August 15, your harness can be scheduled up to a month after that. image image

 

Posted on

S&P Radiators For Your MK1 Swaps

So you’ve installed your new mk4 powerplant into your mk1, now you are left with plumbing it in.  Some swaps (vr6 specifically, the TDIs dont fit well either.) require you to modify the radiator, and finding stock hoses that will work can be a scavenge-fest.

We have used a stock mk1 rabbit radiator flipped upside down, then you have to cap the overflow port, and it wants to leak eventually, not to mention that your temp switch is now across the engine bay and in the way of everything you just installed..

Soo… we went looking for OEM options, found a dasher radiator that works pretty well, unfortunately the aftermarket support for Dashers is very small.  There seems to be little to no stock of the replacement dasher radiators anymore. Leading us to our natural course of action, make something that works the way we want.

 

In about 1-2 months, we will be stocked with a new radiator for your swaps.  Fully tig welded endtanks, no plastic all aluminum construction coupled with the dual pass design will help keep your rabbit running cool. Stock mounting pins and core-support mounting tabs are in place.  We also have removed the overflow port as most mk4 based swaps have a port on the motor or in the factory hoses.

These will also work for those who want to run carbs or ITBS and are using some sort of an overflow container.

 

dualflowvw search rescue 2sciroccorad2sciroccorad1sciroccorad3

 

Posted on

24k – Sal’s Vr6 Swapped Mk2 Golf

Sal Robertson, co-owner of S&P Automotive, bought this car a little over a year ago. Having owned and built a lot of different VWs, he decided to let this one sit for a while whilst he decided ultimately what direction to go with the car.

sp720-130

To kick things off, Sal shipped the car off to his painter to have the car resprayed in the OEM LE1V Gold Metallic, thus beginning with the car’s moniker of 24K.

sp720-113

While the car was away a low mileage 24V VR6 and a 1995 2.0 GTI donor car were sourced. The 4 lug suspension, coilovers, Nuespeed F&R sways, 10.1” brakes for a base were reappropriated, and a host of new parts from axles, and brakes, down to the tie-rods and some hot cams were thrown in the mix.

sp720-106 sp720-105

After getting the car back, Sal went to town. Inside an awesome set of low bolster Recaros were placed in the front and matched to the OEM tweed on the rears and the door cards. The dash and plastics were re-dyed to the original dark brown, and the cluster was treated to some Autometer ES gauges to keep an eye on things under the hood.

sp720-108

The car presently rides on those pristine Ronal Turbos IIs and perfectly fitted Kumhos, but we don’t know for sure that those will be permanent…

Eurobumpers and e-code lights finish up the exterior of the car, keeping it simple and classic.

sp720-143

As far as entertainment, and the sound system… What better soundtrack could one have than a mildly massaged 2.8 24V VR exhaling through a 2.5” Borla exhaust? IMHO, none. Whilst idling, the car gently purrs with nary a loud rumble to clue you in on the work that has gone on; until you hit the pedal on the right, that is.

sp720-147

Some might call it too simple, saying that it needs some 16 by eleventy wheels, mad camber, and tires that look impossible to mount or drive on. But, this car… clean, classy, and 24K all the way.

sp720-134

Coming soon, an inside look into S&P Automotive and a few other recent builds. Be sure to check back, and hit the like button over on Facebook!

sp720-137

-CM
sr83.com

 


But we can’t forget about Seth’s Jetta!!!
Another fine example of S&P Original goodness, when Seth saw this thing, he had to have it.

sp720-133

It wasn’t in its current state when he bought it from Sal & Perry, it took a little of Seth’s imagination and S&P’s elbow grease to fit the 12v vr6, complete with fully polished Schrick intake manifold.

img_1535

Yea, those are common, just roll out to your local bone yard, they’re everywhere…
While Sal chose the old school feel with the golf, Seth felt that the original Recaro Trophies just werent quite what he was looking for and opted for front & rear Recaros from a Mk4 GLI.

dsc_4815 dsc_5780

Now don’t get me wrong, I’m all about keeping certain cars true to their vintage roots, but there’s a lot to be said about a slightly more modern, comfortable seat, that’ll hold you through the twisties.

img_8952

These days, low seems to be the only thing people think about when “building” a car. And though I’m a fan of all aspects of suspension and wheel fitment, I have to say, its quite relieving to come across enthusiasts these days who can build their cars and drive them, rather than garage queens and speed-bump dodgers.

img_1740x

Thanks for the opportunity to shoot your cars guys.

For more info on S&P Originals, check out their website at S&P Automotive!

-Josh
sr83.com